Author: Jay Vasdewani

During fall season of Illinois, the weather is usually colder and some component of the vehicle can be affected. The first inspection a mobile mechanic should check is antifreeze. The antifreeze should have a proper mixture of 50/50 and the antifreeze should be filled to the top of the radiator and to the full line of the overflow tank. Also, if the antifreeze is dark brown in color or has more than 30,000 miles then it is time to flush the cooling system.

After the antifreeze inspection, the mobile mechanic should inspect the battery and alternator system. The battery should have the minimum cold cranking amps for your vehicle and the voltage of the battery should be no less than 12.6. If the battery is weak, it should be replaced. In addition, the alternator should produce at least 13.5 – 14.2 volts. If the voltage is out of specification, the alternator should be replaced if it is producing too much voltage or too less. Next, Auto repair shops should check all drive belts for cracks, deterioration, and deflection. If the belts condition is worn have the mobile mechanic replace the belt.

Moreover, the fuel system should be inspected. The fuel filter, fuel pump, fuel lines, fuel injector should be inspected by a car repair shop. During the cold season, it’s is more difficult for fuel to move through the line, any restriction such has a dirty fuel filter, clogged fuel injector or weak fuel pump will make the vehicle difficult to start. Always have the mobile mechanic start with the basic and easiest part to replace and work his way up until the vehicle is running great. Next, the auto repair shops should inspect the tires. It is best to get snow tires with winter traction since it snow in Illinois. The tires should be properly inflated to the correct PSI.

In addition, there are many more components and that should be check. Engine oil should be replaced every 3,000 miles or 3 month so new oil moves more freely than older oil. Also, transmission fluid should be inspected. The color should be bright pink or if the fluid is older than 2 years or more than 30,000 miles it is time to replace the fluid. The brake system should be inspected since driving in the snow is dangerous, the brake system and abs should both work well. The abs light should not be on and there must be enough brake pads for stopping.  Furth more, if you need more inspection, call your local mobile mechanics and they will be more than happy to assist you and prepare your vehicle for the fall season. It is important to have your car checked and repaired by a reliable mobile mechanic. Skip the Auto Repair Shops in Naperville, Car Repair Shops in Northbrook, Auto Repair Shops in Elmhurst, Car Repair Shops in Des Plaines, since it is highly recommended to call Mechanics in Northbrook, Mechanics in Elmhurst, Mechanics in Naperville, and Mechanics in Des Plaines to perform an inspection.

The brake system is the most important system in a vehicle. It helps bring a vehicle to a stop and prevent a collision. Call your local Mobile Mechanic in Stafford, TX to help inspect your brake system and replace required parts as needed. In a brake system, it consists of all disk brakes or drum brakes which is usually the rear. In a disc brake system, it consists of disc brakes, rotors, calipers (single and dual piston), brake hardware and caliper guide pin. When servicing a disk brake system, it is important to check the condition of the brake system. Automakers provide specifications when to replace certain components of the brake system.

Brake pads should last longer than 40,000-60,000 miles if driving mostly highways and can last as short as 10,000 miles if driving local streets. Driving habits can determine how long disc brakes can last. For example: if you have a food delivery job, you will mostly likely use your brake very often. In that case, a Mobile Mechanic in Richmond, TX should come to your place whether it’s at your home or office and inspect your brakes at least once a year for safety reasons. Brake pads usually have a mechanical sensor on the brake pads and when the brake pads run low, it rubs against the rotor and a squealing noise can be heard indicating it is time to replace the brake pads. Call your local mobile mechanic in Missouri City, TX immediately do not wait as waiting can lead to brake failure and scoring the rotors.

When replacing the brake pads, certain components should be replaced for example: the brake hardware, brake pads and rotors should be resurfaced. The rotor cannot be resurfaced more than 2-3 times otherwise; it will become thin and will longer be in specification. The brake fluid should be flushed at least every 2 years and brake sliding pins should be lubricated with recommended good quality brake lube. The brake caliper piston should also be inspected for potential leaks, and if it is leaking the caliper should be replaced. In that case, when the caliper is replaced; new brake fluid should be used and the system should be bled for air. Sometime during a brake pad replacement, the caliper may be seized and the piston may not go back in. Again, the caliper should be replaced for safety reason.

In a drum brake system, the brake springs, wheel cylinder, drum shoes, parking brake strut, hold-down pin, parking brake lever, adjusting screw assembly and automatic adjuster level and pivot should be inspected. It is recommended to not to reuse the springs and retainer, as overtime the spring can lose its ability to hold the drum shoe in place.  A certified ASE mobile mechanic in Spring, TX should be able to determine what needs to be replaced. For example, you can ask the mobile mechanic to inspect the wheel cylinder for leaks, the spring for tension, parking brake lever and so on. The drum should be resurfaced when the drum is scored, out-of-found, or worn unevenly or replaced if it is no longer in specification.

After the drum brakes have been replaced, the adjusting screw assembly should be adjusted so the drum shoes can properly be press against the drums. Also a quick test will help determined whether it has been properly adjusted. With the vehicle on the floor, lift the hand brakes or press the foot brake if it has one. The vehicle should not move at all when you trying to push it in neutral and if it does move, have your mobile mechanic readjust the drum brakes. The vehicle should be test drive to make sure the brake system is working properly. Remember to contact your mobile mechanic and set an appointment.

There is nothing worse than a dead car especially when you need to get somewhere on time. There are several possible root causes that are preventing you from starting your car. Some are easy and can be fixed by an average Joe while others may need a mechanic to take a look. Here are some of the common symptoms and causes behind them:

• Nothing happens when you turn the key (No clicking or cranking)

More than likely you have a dead battery in scenario. You can try to jump the car using a spare battery, battery booster or another car. If this issue happens more than one time, have the battery and alternator inspected by an auto mechanic such as our Mechanics in San Diego

• Even with a jump, nothing happens when you turn the key (No clicking or cranking)

If nothing happens even with a jump, then most likely there are issues with connections between the battery and the starter or the starter itself.

• A clicking noise but doesn’t crank

This usually means you have a weak battery. Try jumping the car in this situation and if successful, have a technician run a battery diagnostics to see if it’s time for a new battery. If jumping the car doesn’t work, then you may have a bad connection between battery and the starter, a bad starter solenoid or a bad starter itself. It’s time to engage a mechanics in Poway, CA.

• Engine is cranking very slowly

This is pointing towards a weak battery. Try jumping the car and if successful, considering replacing the battery unless you see an obvious cause for charge drainage such as lights left on overnight.

• Car cranks but doesn’t start

In this situation, you can have a bad fuel pump, spark plug issues, ignition coil issues and a blockage/leakage of fuel itself.

• Car starts for a few seconds then it dies

This symptom is pointing towards a faulty fuel injector or a fuel flow issue. It’s time to book a mechanics in Encinitas as it involves advanced repairs.

If you need help with any of your auto repair needs, Auto Repair in Del Mar, CA can send you a certified mobile technician. In most cities Otobots have techs that can assist you on the same day with in few hours.

Belts are part of maintenance and are required to be inspected and replaced at certain interval to prevent disastrous problem. For example, one of the most important belt replacements is the timing belt. A timing belt should be replaced every 60,000-120,000 miles depending on the manufacture requirements. Some manufacture recommends replacing at 60,000 or every 5 years while different manufacture may recommend replacing every 120,000 or every 10 years. The reason why timing belt is very important is because it helps synchronize the crankshaft, camshaft, piston, and valve. When the timing belts breaks, the valve can hit the piston thus leading to an expensive repair for an interference engine. For a non interference engine, this will not be an issue.  

Another important belt that requires attention is the V belts. A V Belt can turn multiple pulleys at once. For Example, a V belt can turn the alternator, air compressor and power steering pump at the same time. When the belt breaks, the alternator loses the ability to charge the battery therefore draining the battery and eventually the vehicle will come to a halt. In addition, the power steering pump will lose its function to provide steering assist to the driver therefore making it difficult for the driver to turn left and right. On a V belt engine, there may be multiple V belts turning different parts. You can always consult with a Mechanic such as Mobile Mechanics in Evanston to get more advice and maintenance tips.

Serpentine belt is a belt that turns all pulleys at once. For example, most Ford, Chevy, and Dodge trucks use the serpentine belt design. On a serpentine belt design, when the belt snaps, the vehicle loses all function. For example is no steering assist, no power, no air condition, and so on. Therefore, again the vehicle will come to a halt.

The best way to prevent disastrous repairs is to give attention your vehicle needs. The belt should be inspected for cracks, dryness, hardness, squealing noises and so on. When the belt is making a squealing noise, sometime it is difficult to differentiate whether the belt is faulty or the pulley is faulty. One way to check is to take water and put it on the belt while the engine is running. If the noise goes away, the belt is faulty, however if the squealing noise did not go away, one of the pulleys is faulty. An example is the power steering pump pulley, alternator pulley and so on. So remember, take care of your vehicle to prevent future problems or consult with a Mechanic near your location.

When the weather warms up and the days get longer, the open road seems to call your name. Whether you are going 3 hours away or are gearing up for a cross-country excursion, before you load up the trunk, you will need to make sure you car is ready for the road. Those who forgo a brief mechanical check over before taking to the highway are putting themselves at risk of being stranded. Here are a few preventative measures to take to ensure safe travels!

Check your oil

From the comfort of your driveway, check your oil levels and the date you’re due for an oil change. In your car manual, you will find a manufacturer-recommended oil change interval listed. If you are close to what’s listed, take your car in to be serviced. If you are traveling a long distance, pulling a trailer or traveling in hot weather, consider opting to use synthetic oil. This oil will give you extra protection against thermal breakdowns and it will also cut friction losses in the engine. Synthetic motor oil will also bump up your fuel economy, which will help you save money on a long trip.

Your transmission and drive axle both have their own lubricant supplies so those fluids will need to be checked, as well. Your owner’s manual will include a change interval listed for these too, and they are quite a bit longer than engine oil. Your local oil change shop will be able to handle the task of changing fluids.

Hoses and belts

The hoses in your car are regularly exposed to high temperatures, which is why they should be checked before getting on the road. If your hose were to get hard and crack, hot water will spurt out, and leave you in a world of trouble, far away from home. To avoid this catastrophe, look where the input and radiator hoses attach to the engine and radiator. Be sure to check your heater hoses as well, which run from the engine, into the firewall and back. If you spot any bulges or blisters, this is indicative of a weakness in the hose wall and they will need to be replaced.

Check your engine belts by turning them sideways so you can see the friction surface. If they are ragged or showing their fiber cords, then it’s time to get new ones. Also check to see if your belt is stretched or loose. An indicator of a loose belt is if you hear loud screeches when pulling away from a traffic light. A loose belt will need to be retensioned or it will fall off.

Battery

The last thing you want to do is be stranded on the side of the interstate trying to find someone to assist you in jumping the battery of your car. If your starter sounds off or slow, it is due to either corrosion or a dying battery. If your car’s battery is more than 2 years old, look to see if the terminals are corrosion-free and the positive and negative leads are on tight. If you spot any white, chalky stuff on the terminals, wipe it off with a wire cable brush.

Tire pressure

Tires are your immediate contact with the road, therefore they need to be thoroughly inspected. The recommended tire pressure for your car will be listed on the driver’s side door, in the glove compartment or on the door of your gas tank. You can check the tire pressure yourself with a gauge purchased at an auto parts store and add air at a nearby gas station.

Road trips are meant to be stress free and fun! Whether you are hitting the road with friends and family or traveling with the elderly, safety should be your number one priority. Take a moment to take care of you car and in return, your car will take care of you!

A great way to keep your car in good running shape is to check the fluids yourself. It’s an inexpensive and simple way to prevent engine wear or damage, and save money on auto repair. While checking the fluids in your car is a fairly straightforward process, it does require some knowledge. Here are seven fluids you should pay attention to keep your car running right:

1. Oil

Your engine needs oil to keep the moving parts lubricated. To check the oil, take a look at under the hood, the dipstick in the oil tank should be close to the front of the engine, near you. Pull out the dipstick, wipe it with a cloth or towel, and then dip it all the way back into the oil tank. Pull it back out and see where the oil line is. There should be a notch in the dipstick to show you where a safe oil level should be. If it seems low, check the cap or your car manual for the type of oil you should use and then add some or schedule an oil change with Otobots.

2. Radiator Fluid

The radiator is at the heart of your car’s cooling system. If you run low, you risk overheating in traffic and getting stranded on the side of the road. Check this fluid when your car has been driven, not when it’s cold. The contents of the radiator are pressurized, so never remove the cap when the engine is hot or running. You’ll likely find the radiator cap in the front and middle of the engine compartment. Open it carefully with a rag, and look into the radiator to see if you can see the coolant. If you can’t see it near the top, you’ll need to add more by yourself of contact our Mobile Mechanics in San Francisco,CA

3. Washer Fluid

The windshield-washer fluid doesn’t keep your engine running, but it’s really helpful for making it easier for you to see while you’re driving. Checking the washer fluid is easy. Most cars have opaque washer fluid tanks with a label on the cap like “windshield” or “washer.” You should be able to see inside without removing the cap. Otherwise it should just twist off, since the fluid isn’t pressurized or dangerous. If you need more fluid, don’t just use soap and water. Get some washer fluid that’s formulated to handle bugs and road grime. If you’re completely out and in for a dirty drive, the window cleaner you use at home can work until you can get washer fluid.

4. Transmission Fluid

Transmission fluid keeps your transmission lubricated, which can prevent many expensive issues from developing. The other dipstick in your engine (not the oil one) is for your transmission fluid.  To check your Transmission fluid, Pull out the dipstick, with the gearshift in Neutral or Park and the parking brake on, let your engine run, Dip the tip of your index finger into the fluid on the dipstick and rub the fluid between your finger and the tip of your thumb. The transmission fluid on the dipstick should be pinkish and almost clear. If it looks or smells burnt or has particles in it, have our Mobile Mechanic in Oakland,CA drain and change the fluid.

5. Air Conditioning Coolant

When the weather warms up, you’ll want to check the coolant (sometimes called refrigerant or Freon) level in your air conditioning system to make sure it’s ready to work. Checking this fluid can be a bit complicated, so our Mobile Mechanic in Daly City,CA can help with this complicated task. Before you begin, you’ll need to get the proper A.C. gauge and thermometer from an auto-parts store. If it turns out your coolant level is low, you can easily recharge the system with supplies from the auto parts store.

6. Brake Fluid

To check your car’s brake fluid, you have to find the reservoir. Its location depends on the type of car you have. The brake fluid reservoir is usually near the back of the engine compartment. Clean off the outside before you open the tank, as any dirt in the fluid can be dangerous in your system. To open the reservoir, unscrew the cap or use a screwdriver to pry off a clamp that may be holding it in place. Look inside to see where the fluid level is. It should be within about a half-inch of the cap. If it isn’t, check your manual to see what kind of fluid you should add. Also check the color of the brake fluid—if it looks dark in color, you should have a mechanic replace it.

7. Power Steering Fluid

A whining or squealing noise when the wheels turn can be an indication that the power steering fluid is low. Power steering fluid keeps your car’s power steering working by keeping it lubricated, adding power to your ability to control the car’s wheels. To check the power steering fluid, find the reservoir under the hood. It’s usually on the passenger side. Either way, it’s likely to be near the belts and the cap will probably say “steering” on it. Most cars have an opaque container, so you should be able to see the fluid level without opening the cap. Otherwise, before opening the cap, clean the area around it with a cloth so dirt doesn’t get into the system. Then, open the cap and use the dipstick the same way you would with the oil tank. If the fluid is low, you can easily add more yourself or reach out to our Mobile Mechanics in San Jose, CA. You may also want to check around the reservoir to make sure there isn’t a leak.

Keeping your vehicle in top condition is vital throughout the summer because when the weather is warmer, you’re more likely to take it out for a spin. The Mobile Mechanics in San Jose understand it can be a hassle to perform regular maintenance if you’re occupied, but here are a couple of easy care hints which will make your car healthy for the summer.

• Check Tires: Preserving the appropriate tire pressure is vital; check your tire pressure once weekly. Heat will inflate tires more than normal. Clear sky and roads can motivate anybody to hit a drive for long on the weekend. But driving with under-inflated, over-inflated, worn out or misaligned tires isn’t safe at all. The standard tire pressure changes with changing temperature. Check your car’s user manual to learn about the right tire pressure or take your car to a nearby garage to let a tire specialist do the job for you. Track air pressure in your tires often to avoid damages. And also do not forget to check your spare tire if it is inflated properly and also in good condition.

• Assess Hoses and Belts: These things are often checked when you go in for a tune-up, but it doesn’t mean you can’t check them periodically by yourself. Hoses and belts are critical to your engine, and any signs of damage, for example, cracks or fraying, should be taken care of immediately as prescribed by our Mobile Mechanics in Fremont.

• Change Car Oil Consistently: Shifting your vehicle’s oil often will make your car last longer, and enhance engine performance. You must also frequently check your oil levels; Otobots Mobile Mechanics advocates you change your oil once a week when you gas up throughout summer time.

• Change Air Filter: It’s an excellent idea to change your air filter once every season. Take a look under the hood; if your air filter is black and grimy, it’s time for a change. Having a clean air filter is crucial, particularly throughout the summer, as it influences the performance of your vehicle’s AC unit.

• Preserving AC Unit:  Before summer comes, for those in Hayward,  have your air conditioner checked by reputable mobile mechanics in Hayward. There is a probability that you will make use of it more during the summer period than in the winter. Your air conditioner might not be working properly even if it is working at all. When you run your air conditioner at least once a week it will ensure all hoses and valves are working well.

Cleaning your car battery: Dead battery and jumpstarts are a regular sight throughout the winter days. The hot summer days even get more rigorous on a car battery. High temperature boosts the speed of chemical reaction in the battery that makes the battery overcharge. When a car battery overcharges, it may shorten the service life expectancy of your battery. Moreover, excessive heat also can cause the internal fluid of the battery evaporate. It is vital to consistently clean battery cables and terminals to ensure it works properly all year round. Ensure all battery connections are tight enough. Should you suspect the battery is overcharging or firing more quickly, for folks in Union City, you can visit your closest mobile mechanics in Union City to get your car battery fast fixed up.

Driving in summer without a well-chilled cabin is almost unthinkable (and even dangerous). Hence maintenance of your car air conditioner is very important. We know that after the long and hard winter, the last thing you are thinking about is the summer heat, but now is a good time to consider the possibility and functionality of your car air conditioning system.

We live in a busy world, so most people will not give their AC systems a thought until they fail to function properly. Even simple maintenance procedures such as cleaning and replacing the filters often go undone. The short-term effects of such oversight can be poor performance. The long-term effects, however, can be a significantly reduced life for air conditioning units.

An air conditioner is a very hard piece of equipment. It is designed to withstand all kinds of abuse and to keep running. This is very good in many ways, but it can lead to complacency about maintenance. Our Mobile mechanics in Fort Worth can perform maintenance on your air conditioning equipment.

An air conditioner loses up to 5% of its original productivity within a year of poor maintenance operation. The good news is that you can recover most of that loss of efficiency through regular maintenance. Studies show that with regular tuning a unit will maintain up to 95% of its initial efficiency.  Our Auto Repairs in Arlington, TX handles all these tunes ups and maintenance on your Car AC. An air conditioner properly maintains even doing a better job of dehumidifying your car.

The Importance of Car Air Conditioner Maintenance

Reduce expenses

Maintenance of air conditioning is synonymous with savings, since the cost of Auto Repair in Richardson can multiply by five or six the normal consumption of gasoline

Avoiding health problems

In addition, problems arising from poorly functioning air conditioners can affect health. Among the main problems can be named bronchitis, rhinitis and pharyngitis, since exposure to the air circulating in the car is done through the filters. When the filters are not clean, they serve as a housing for fungi and bacteria that greatly affect the human respiratory tract.

Goodbye to bad smells and sounds

During the season changes, the air conditioner may emit bad smells if it has not been properly maintained. It is also possible that, due to a lack of revisions, the equipment starts to emit sounds.

It is also suggested that a month before each season (before the beginning of the summer and before the beginning of the winter) should be requested for an economical air conditioning maintenance. The importance of maintenance and set-up of air conditioning equipment is a vital issue for the health of people who, too, can serve to avoid extra energy consumption and contribute to saving. And all this, with quite affordable prices. Better safe than sorry. Additional maintenance items should be left to trained professionals licensed for proper maintenance services.

Do not wait any longer, contact Otobots at 888-875-5170 or visit our website Otobots.com to start saving money today.

Some late-demonstrate top of the line autos has frameless windows that consequently wrench themselves open a quarter-inch or so as the entryways are opened. It happens so quick that you may not see it. The window opens quickly, clearing the seal before the entryway lock clears. It then closes consequently about a moment after the entryway hook locks. There are two points of interest to this. To start with, the marginally open window vents inside air, which can make entryways on firmly fixed autos trying to open by springing the entryway back open against pneumatic force. It likewise gives the maker a chance to utilize a boundlessly extraordinary style of a seal on the highest point of the window. The seal can all the more nearly look like a car entryway seal, with a little lip distending over the maximum point of the glass. This kind of seal won’t take a shot at frameless windows because the glass needs to explain the seal as it opens and closes. This type of seal permits less water and commotion interruption. The drawback is the rationale control module expected to accomplish this. Repairs will most likely need a processing plant shop manual and, conceivably, some expensive parts.

If your auto has control windows, all it takes is the touch of catch to give natural air access or keep the rain out. Be that as it may, now and again this element needs a little help to work as it ought to. The specialists of Mobile mechanics in Austin, say that if your auto’s energy windows are on the fritz, one of their talented experts can rectify the issue.

The initial phase in power window repair is determination. A professional needs to painstakingly sift through your auto’s electrical framework to figure out what’s creating the issue. A wiring outline might be utilized, and electronic testing hardware might be used to get the to the base of the problem.

At the point when an auto’s energy windows fall flat, regular guilty parties incorporate the switch, engine, and wiring. Some portion of the repair exertion may include the bright light on installation issues by investigating the auto’s energy and ground circuits. Toward the finish of this reality discovering mission, the expert will complete an analytic report and prescribe a way of activity on vehicle repair.

Now and again control window repair calls for finish substitution of maturing or used parts—the flawed segments are expelled, and new parts are introduced to get your windows running like new. Benefit regularly doesn’t take too long, and much of the time, you’ll have your auto come back to you in a few hours.

Sometimes, despite the fact that power windows haven’t totally quit working, they are ease back to open and close. In cases this way, it’s best to take the auto in for repair, since if you don’t, the issue will result in all likelihood decline.

Broken power windows are a real disaster, particularly on the off chance that they stall out down in hot or icy climate. In a couple of hours, you can investigate and settle your energy windows by taking after these means.

Another toll-stall, another mile- – or if nothing else it appears as though the tollbooths come each mile on this street, with a half mile of movement sitting its relaxed far up to the token creature. Inside a safe distance of the receptacle, you flip the power window switch with one hand while the contrary fingers a symbol, planning to whip it into the wicker bin similarly as you floor the throttle. All goes as arranged – with the exception of the window doesn’t move, the token skips over into your face, and you need to stick on the brakes, split the entryway and pitch a moment token underhanded to keep from getting a ticket as a toll dodger, all to the tune of horns booming from the autos behind you.

Luckily, control windows are one of the more stable frameworks on a late-demonstrate auto. Also, determination and repair are typically entirely direct.

With the number of auto centers that offer various services, it is important to consider the track record of the auto center and the expertise as well. It is advisable to choose the auto center which specializes in window repairs. Fortunately, some these centers are spread out in different parts of the United States, specifically in Austin, Texas. Also, there are some good Mechanics in Round Rock; Cedar Park auto mechanics too have good specialists when it comes to car window repairs. Thus, for all your car’s window fixing during this Spring, you can always visit any of the above-listed website and get a Free Quote and our Mechanics comes to you.

Otobots is a Mobile Mechanic service provider and we administer and repair autos at the client’s home. We offer on demand auto repair services at the helpful of the customer’s favored area. Check out services, coverage, and  reviews at www.otobots.com